Construction Management Revit drawings
Assessment 2.3.2
Assessment 2.3.2 consists of created views that must be placed onto sheets to prepare a set of 9 printable construction drawings and tables of specification (3D model & 2D views).
Please ensure all views and tables are appropriately labelled and include a cover page.
Detailed instructions for all the steps are given in the table below. Please refer to the Assessment 2 – Mr. Jacob House PDF document for the layout of the Model to be constructed on Revit found in the Assessment 2 Files Folder. Revit families, templates, and other essential information to model the required house are also provided in that folder.
Table 3 – Assessment 2.3.2
|
Subtask 2.3.2.1 Unless otherwise indicated, page numbers in this table refer to the Assessment 2 Drawings – Mr Jacob House .pdf document All sheets should be A3 size (use A3 metric (AUS) title block sheet within the Revit Families folder) |
LinkedIn Learing.com links
Ensure you have logged into your LinkedIn Learning |
||
|
Component 10 (10 %) |
Sheet (A01) Title Page (1%) |
Provide THE TITLE PAGE (list of sheets to be provided, as shown on Page A01). Also, it should include ONE 3D View of the Building Exterior. Not multiple 3D perspective views, please. 3D View should be resized to fill up the sheet |
See Page 12 of Revit Instructional Document 6 on the course website Working with Sheets See Page 14 of Revit Instructional Document 6 on the course website. |
| Sheet (A02) Roof Plan (2%) | Provide ONE VIEW of the Roof Plan (annotations, tags, etc., to be provided, as shown on Page A06). | ||
| Sheet (A03) Orthographic Drawings (2%) | Provide ONE VIEW of the Ground Floor Plan (dimensions, annotations, tags, etc., to be provided, as shown on Page 3). | ||
| Sheet (A04) Colour Fill Legend (1%) |
Add the Ground Floor Plan with the Colour Fill Legend based on the Rooms on one sheet. Room tags need to be provided on this view. |
||
| Sheet (A05) Sections (2%) |
Add the TWO Sections Views on one sheet. Both sections must contain detailed dimensions, annotations & levels. |
||
| Sheets (A06 & A07) Elevations (2%) |
Add the FOUR Elevation Views on two separate sheets (2 views each). The Elevation Views are to be detailed as shown on Page 7. |
||
|
Sheet (A08) Basic Schedules for Floor and Door (1%) |
Add the Floor and Door Schedules created on one sheet. Resize the table and increase the font size to fill the sheet. |
||
|
Sheet (A09) Material Take-off for Walls and Windows (1%) |
Add the Walls and Windows Material Take-off Schedules on ONE sheet. Resize the table and increase the font size to fill the sheet. If Schedules can’t fit on a single sheet add an extra Sheet. |
See Page 7 of Revit Instructional Document 5 on the course website | |
Table 2 – Task 2.3.1
| Sub-task 2.3.1 | LinkedIn Learning.com links | ||
| Unless otherwise indicated, page numbers in this table refer to the Assessment 2 Drawings – Mr. Jacob House .pdf document. | Ensure you have logged in with your UniSA Library Access | ||
|
Component 5 (2.5%) |
Constructing Roof |
Create a 3D Roof based on the profile of dotted roof lines on the Floor Plan (page 3) and Roof Plan (page 6). · Overhang (Eaves) is 450mm, · Roof pitch will be set at 22.5° and will be metal roof sheets as indicated on Page 6. The ceiling is not required to be created and edited. |
· |
|
Component 6 (2.5%) |
Creating Sections & Elevations |
· Section: Provide TWO (2) Sections. The details for the two Section views are provided at the end of this page. · Elevation: Provide FOUR (4) Elevations (Front, Rear, Right & Left) examples shown on Page 7. |
Creating Sections |
|
Component 7 (5%) |
Adding Dimensions & Annotations |
Provide Dimensions & Annotations for:
Provide Slope Annotation for Roof on Elevation views.
Provide Door, Window & Room Tags on Floor Plan. Assigning Rooms and Areas by referring to Page 3:
|
|
|
Components 8 & 9 (5%) |
Creating Legends & Schedules |
Incorporate a Colour Fill Legend to Rooms and Areas on ONE Floor Plan based on the Rooms provided on page 3 (duplicate plan view & only include room tags). Add a title to the colour legend Create separate Schedules for Floors and Doors: 1. Floor: Count, Family and Type, Volume 2. Door: Count, Family and Type, Width Create Material Take-off Schedules for Windows & Walls: 3. Wall: Family and Type, Material: Name, Area Window: Family and Type, Material: Name, Width |
|
Required Section 01 & 02 views:
Submission
You can submit your Revit files (components 5-10) + Drawings and Specifications via the Assessment 2.3 submission link below.
https://uo.unisa.edu.au/mod/assign/view.php?id=884839
Mark as done